# How to Measure Variability in Quantitative Data

Statisticians use summary measures to describe the amount of variability or spread in a set of quantitative data. The most common measures of variability are the range, the interquartile range (IQR), variance, and standard deviation.

## The Range

The **range** is the difference between the largest
and smallest values in a
set of values.

For example, consider the following numbers: 1, 3, 4, 5, 5, 6, 7, 11. For this set of numbers, the range would be 11 - 1 or 10.

## The Interquartile Range (IQR)

The **interquartile range** (IQR) is a measure of variability,
based on dividing a data set into
quartiles.

Quartiles divide a rank-ordered data set into four equal parts. The values that divide each part are called the first, second, and third quartiles; and they are denoted by Q1, Q2, and Q3, respectively.

- Q1 is the "middle" value in the
*first*half of the rank-ordered data set. - Q2 is the median value in the set.
- Q3 is the "middle" value in the
*second*half of the rank-ordered data set.

The interquartile range is equal to Q3 minus Q1. For example, consider the following numbers: 1, 2, 3, 4, 5, 6, 7, 8.

Q2 is the median of the entire data set - the middle value. In this example, we have an even number of data points, so the median is equal to the average of the two middle values. Thus, Q2 = (4 + 5)/2 or Q2 = 4.5. Q1 is the middle value in the first half of the data set. Since there are an even number of data points in the first half of the data set, the middle value is the average of the two middle values; that is, Q1 = (2 + 3)/2 or Q1 = 2.5. Q3 is the middle value in the second half of the data set. Again, since the second half of the data set has an even number of observations, the middle value is the average of the two middle values; that is, Q3 = (6 + 7)/2 or Q3 = 6.5. The interquartile range is Q3 minus Q1, so IQR = 6.5 - 2.5 = 4.

Notice that this process divided the data set into four parts of equal size. The first part consists of 1 and 2; the second part, 3 and 4; the third part, 5 and 6; and the fourth part, 7 and 8.

## An Alternative Definition for IQR

In some texts, the interquartile range is defined differently. It is defined as the difference between the largest and smallest values in the middle 50% of a set of data.

To compute an interquartile range using this definition, first remove observations from the lower quartile. Then, remove observations from the upper quartile. Then, from the remaining observations, compute the difference between the largest and smallest values.

For example, consider the following numbers: 1, 2, 3, 4, 5, 6, 7, 8. After we remove observations from the lower and upper quartiles, we are left with: 3, 4, 5, 6. The interquartile range (IQR) would be 6 - 3 = 3.

## The Variance

In a
population,
**variance** is the average squared
deviation from the population mean, as defined by the following formula:

σ^{2} = Σ ( X_{i} - μ )^{2} / N

where σ^{2} is the population variance, μ
is the population mean, X_{i} is the *i*th element
from the population, and N is the number of elements in the population.

Observations from a simple random sample can be used to estimate the variance of a population. For this purpose, sample variance is defined by slightly different formula, and uses a slightly different notation:

*s*^{2} = Σ ( x_{i}
- x )^{2} / ( n - 1 )

where *s*^{2} is the sample variance, x is
the sample mean, x_{i} is the *i*th element from the sample, and n
is the number of elements in the sample. Using this formula, the sample
variance can be considered an unbiased estimate of the true population
variance. Therefore, if you need to estimate an unknown population variance,
based on data from a simple random sample, this is the formula to use.

## The Standard Deviation

The **standard deviation** is the square root of the
variance. Thus, the standard deviation of a population is:

σ = sqrt [ σ^{2} ] = sqrt [ Σ ( X_{i} - μ )^{2} / N ]

where σ is the population standard deviation, μ
is the population mean, X_{i} is the *i*th element
from the population, and N is the number of elements in the population.

Statisticians often use simple random samples to estimate the standard deviation of a population, based on sample data. Given a simple random sample, the best estimate of the standard deviation of a population is:

*s* = sqrt [ s^{2} ] = sqrt [ Σ ( x_{i}
- x )^{2} / ( n - 1 ) ]

where *s* is the sample standard deviation, x is
the sample mean, x_{i} is the *i*th element from the sample, and n
is the number of elements in the sample.

## Statistics Calculator

Use Stat Trek's Statistics Calculator to compute measures of variability (e.g.,range, interquartile range, variance, standard deviation) for any data set. The calculator is free and easy to use. You can find the Statistics Calculator in Stat Trek's main menu under the Stat Tools tab. Or you can tap the button below.

Statistics Calculator## Effect of Changing Units

Sometimes, researchers change units (minutes to hours, feet to meters, etc.). Here is how measures of variability are affected when we change units.

- If you add a constant to every value, the distance between values does not change. As a result, all of the measures of variability (range, interquartile range, standard deviation, and variance) remain the same.
- On the other hand, suppose you multiply every value by a constant. This has the effect of multiplying the range, interquartile range (IQR), and standard deviation by that constant. It has an even greater effect on the variance. It multiplies the variance by the square of the constant.

## Test Your Understanding

**Problem 1**

A population consists of four observations: {1, 3, 5, 7}. What is the variance?

(A) 2

(B) 4

(C) 5

(D) 6

(E) None of the above

**Solution**

The correct answer is (C). First, we need to compute the population mean.

μ = ΣX / N = ( 1 + 3 + 5 + 7 ) / 4 = 4

Then we plug all of the known values into formula for the variance of a population, as shown below:

σ^{2} = Σ ( X_{i} - μ )^{2} / N

σ^{2} = [ ( 1 - 4 )^{2}
+ ( 3 - 4 )^{2} + ( 5 - 4 )^{2} + ( 7 - 4 )^{2} ] / 4

σ^{2} = [ ( -3 )^{2} +
( -1 )^{2} + ( 1 )^{2} + ( 3 )^{2} ] / 4

σ^{2} = [ 9 + 1 + 1 + 9 ] / 4
= 20 / 4 = 5

**Note:** Sometimes, students are unsure about whether the denominator
in the formula for the variance should be N or (n - 1). We use N to compute
the variance of a population, based on *population* data;
and we use (n - 1) to estimate the variance
of a population, based on *sample* data. In this problem, we are computing
the variance of a population based on population data,
so this solution uses N in the denominator.

**Problem 2**

A simple random sample consists of four observations: {1, 3, 5, 7}. Based on these sample observations, what is the best estimate of the standard deviation of the population?

(A) 2

(B) 2.58

(C) 6

(D) 6.67

(E) None of the above

**Solution**

The correct answer is (B). First, we need to compute the sample mean.

x = Σx / n = ( 1 + 3 + 5 + 7 ) / 4 = 4

Then we plug all of the known values into formula for the standard deviation of a sample, as shown below:

*s* = sqrt [ Σ ( x_{i}
- x )^{2} / ( n - 1 ) ]

*s* = sqrt { [ ( 1 - 4 )^{2} + ( 3 - 4 )^{2}
+ ( 5 - 4 )^{2} + ( 7 - 4 )^{2} ] / ( 4 - 1 ) }

*s* = sqrt { [ ( -3 )^{2} + ( -1 )^{2} +
( 1 )^{2} + ( 3 )^{2} ] / 3 }

*s* = sqrt { [ 9 + 1 + 1 + 9 ] / 3 } = sqrt (20 / 3) = sqrt ( 6.67 ) = 2.58

**Note:** This problem asked us to estimate the standard deviation
of a population, based on *sample* data. To do this, we used (n - 1) in the
denominator of the standard deviation formula. If the problem had asked us to
compute the standard deviation of a population based on *population* data,
we would have used N in the denominator.